Monthly Archives: January 2019

Zombicide Green Horde Insert – Assembly Instructions

Equipment and Preparation To assemble the trays you will need: Wood glue/PVA, ideally quick drying with a fine nozzle on the bottle. Paper towel, for cleaning up excess glue. Piece of card, or something to protect your work surface.  You will get glue on it! Scissors (felt lined versions), for trimming felt strips to length. […]

Green Horde Abominations Box – Assembly Instructions

The large abominations box is relatively similar to the standard slide in trays, however miniatures slide in to all sides of the tray. The image above shows the layout of the pieces for the abominations box. Note the five different types of rails and their relative locations (click for bigger image) Use the regular sliding […]

Gripper Trays – Assembly Instructions

These instructions cover gripper trays from multiple inserts. The exact number of grippers and layer may vary depending on which game you are building an insert for. Equipment and Preparation To assemble the trays you will need: Wood glue/PVA, ideally quick drying with a fine nozzle on the bottle. Paper towel, for cleaning up excess […]

Token Trays – Assembly Instructions

Equipment and Preparation To assemble the trays you will need: Wood glue/PVA, ideally quick drying with a fine nozzle on the bottle. Paper towel, for cleaning up excess glue. Piece of card, or something to protect your work surface.  You will get glue on it! Sandpaper (optional), for cleaning up burn marks on boxes. The […]

Zombicide Green Horde – Trebuchet Tray – Assembly Instructions

Felt Lining If not felt lining your insert, you can skip this step. The trebuchet tray uses one of the spare long strips labelled “Abominations”. Cut a strip of felt out of the Abominations sheet, by cutting at each end. Run a thin line of glue around the inside of slots on the trebuchet holder […]