Aeon Trespass: Odyssey Insert

Struggling to organise all the contents after you punched all the token sheets and sleeved all your cards?  Then we have got the solution for you!  Our insert has separate trays for all of the cycle specific cards so you don't need to empty the entire box just to play the game.  There are also numerous trays for tokens so they do not all get mixed together, and best of all, all the miniatures still fit within the box. Whilst we have shown the game with all cards sleeved in 100 micron sleeves, the fit is very tight in most trays, so a slightly thinner sleeve, e.g. 60-80 micron would make for an easier fit.  If space is no concern to you, and fitting the contents back in the box is less important than the thickest of sleeves, you can also make your own solution using our existing card storage boxes. Due to the limited space within the box, we would recommend using one of the great sets of print-at-home paper dividers from the files section of Board Game Geek. 

Token trays all have finger holes underneath so tokens never get stuck.

All trays have been optimised for weight by cutting out as much material as possible whilst maintaining strength but not letting game components escape.

Token trays use empty space below the included miniatures insert. They have custom bases that ensure they always end up in the correct location.

The insert is delivered in push out panels. Assembly is required.

Images show the Aeon Trespass: Odyssey base game, which is not included with this product.  Shown game contents are sleeved with 100 micron Docsmagic Premium Sleeves. This is an unlicensed, third-party product compatible with Aeon Trespass: Odyssey.  All copyrights and trademarks are property of their respective owners.

Size

Fits within the original Aeon Trespass: Odyssey box without raising the lid, and adds approximately 0.8kg of weight to the box.

Assembly

The Aeon Trespass: Odyssey box insert is provided flatpack and will require wood glue (PVA) for assembly. Approximate assembly time is 10-20 minutes per tray depending on complexity. Assembly instructions are available here.

Manufacturing time

Usually less than one week.